Neptun Trailer

Laweta N16-380 albs [GN229]

Laweta

model: N16-380 albs [GN229]

Product specification

  • High durability of the trailer design is ensured by a fully welded frame, cold-bent frame sections, 4 lateral beams and a strong welded V-drawbar. All components are hot-dip galvanized.
  • The trailer is available in the registration version with DMC: 1200 kg, 1350 kg, 1400 kg, 1500 kg, 1600 kg.
  • The tilting platform is stabilized with two gas struts for easy loading and unloading.
  • Independent suspension and AL-KO axles ensure safe and stable driving.
  • Standard accessories include two ramps (385 mm long and 415 mm wide, permanently bolted to the frame) made of pressed perforated metal sheets for easy loading and off-loading vehicles.
  • PVehicles are transported on rails (3800 mm long and 420 mm wide) made of pressed perforated metal sheets.
  • On both sides of the fender, there are convenient steps made of pressed metal sheets, and the left fender can be tilted for easy access to and egress from the transported vehicle.
  • Multifunction lamps are installed inside the rear beam. This makes them protected against damage, moisture and mud. Wiring connections are protected in the best possible way to guarantee maintenance-free operation for years.
  • Standard equipment includes:
     Wheel wedges , Two ramps, jockey wheel with a clamp, Two A stabilizers for platform tilting, Two clamps at the back of the trailer
  • Additional optional accessories are offered for single axle car carrier trailers:
    • 15 mm thick anti-slip plywood floor that enables walking and contains any leakage,
    • 1100 kg KNOTT winch with a roller for changing the rope direction,
    • Spare wheel mount,
    • Trailer support (700 mm),
    • AL KO stabilizer that efficiently eliminates tilting from side to side, swinging and swaying,
    • Shock absorbers to reduce dangerous shocks, improve stability while driving and braking and ensure optimal contact between trailer wheels and road surface.
N16-380 albs [GN229]

Type: low-bed

Gross Weight: 1600 kg

Payload: 1175 kg

Internal dimensions: 380 x 185 x 12.5 cm

Wheels: 14 ″

Axle: 1

Brakes: Yes

Front gate: none

Tilt drawbar: Yes

Laweta

1 Rigid and durable design

High durability is guaranteed by hot-dip galvanized fully welded frame and drawbar.

2 Safety and comfort

Independent suspension and AL-KO axles ensure safe and stable driving (in trailers with brakes).

3 Ramps

Standard accessories in models 'atb' include two ramps made of pressed perforated metal sheets for easy loading and off‑loading vehicles. The ramps are stored in special slots under the platform, with additional protection from vibration and sliding out.

4 Transport

Vehicles in models 'albs' and 'atb' are transported on rails made of pressed perforated metal sheets. In addition, on single axle trailers 'albs', there are convenient steps on both sides of the fender, and the left fender can be tilted for easy access to and egress from the transported vehicle. Trailer models' m18 ver. A 'are equipped with a 15 mm thick anti-slip plywood floor and 12 pcs of belt fastening holders.

5 Easy loading and unloading

The load platform in 'albs' and 'm18' is tilted to enable unloading without unhooking the trailer. The platform is stabilized and protected from tilting during loading and unloading operations with gas struts (on single axle models 'albs') and screw jack 700 kg on 'm18 wer. A' models.

6Protection of lamps

Multifunction lamps are installed inside the rear beam. This makes them protected against damage, moisture and mud. Wiring connections are protected in the best possible way to guarantee maintenance-free operation for years.

Accessory GN227 GN228 GN229 GN230 GN211
Name N13-380 albs N15-380 albs N16-380 albs N18-380 albs N27-420 2 atb
Spare Wheel, 185 R14C, 5x112 mm KK008 KK008 KK008 KK008 -
Spare Wheel, 185/60 R12C, 5x112 mm - - - - KK027
Spare Wheelsholder, side GA397 GA397 GA397 GA397 GA415
Anti-slip plywood floor 15 mm GA422 GA422 GA422 GA422 GA414
Driving stabilizer GA402 GA403 GA403 GA403 GA403
Gas Spring 100/22/10 mm QS019 QS019 QS019 QS019 -
Winch with a roller for changing the rope direction GA404 GA404 GA404 GA404 -
Anti-theft, Box Lock w/ Padlock AU121 AU121 AU121 AU121 AU121
Wheel wedges AU123 AU123 AU123 AU123 AU123
Wheel wedge handle AU123A AU123A AU123A AU123A AU123A
Set of shock absorbers for braked axles, AL-KO GA355 GA355 GA356 GA356 2 x GA355
Clamp for Jockey Wheel and Prop Stand, 200 mm (fi48) OK002 OK002 OK002 OK002 -
Prop Stand, 700 mm (fi48) KM006 KM006 KM006 KM006 -
Clamp for Jockey Wheel (fi60) OK003 OK003 OK003 OK003 OK003
Jockey Wheel, (fi60) KM008 KM008 KM008 KM008 KM008
Support leg swingable - - - - KM012
Hand crank for support leg - - - - KM013
A set of support legs - - - - GA423

 

 

Accessory GN222A GN223A GN224A GN225A GN226A
Name N7-380 m18r wer. A N13-380 m18 wer. A N15-380 m18 wer. A N16-380 m18 wer. A N18-380 m18 wer. A
High Cover w/ Strap Fasteners, 1200 mm, 520 g/m2, Grey AP279 AP279 AP279 AP279 AP279
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey AP280 AP280 AP280 AP280 AP280
Hoops for High Cover, 1200 mm pipe GA405 GA405 GA405 GA405 GA405
Spare Wheel, 185 R14C, 5x112 mm - KK008 KK008 KK008 KK008
Spare Wheel, 165/70 R13, 4x98 mm KK006 - - - -
Spare Wheelsholder, under GA406 GA406 GA406 GA406 GA406
Driving stabilizer - GA402 GA403 GA403 GA403
Anti-theft, Box Lock w/ Padlock AU121 AU121 AU121 AU121 AU121
Anti-theft, Steel Locking Shoe w/ Key AU090 - - - -
Anti-theft, Coupling Lock w/ Key AU059 - - - -
Wheel wedges AU123 AU123 AU123 AU123 AU123
Wheel wedge handle AU123A AU123A AU123A AU123A AU123A
Set of shock absorbers for braked axles, AL-KO - GA355 GA355 GA356 GA356
Clamp for Jockey Wheel and Prop Stand, 200 mm (fi48) OK002 OK002 OK002 OK002 OK002
Prop Stand, 700 mm (fi48) KM006 KM006 KM006 KM006 KM006

 

7 Standard equipment

Standard equipment of trailers includes a wheel wedges and a jockey wheel with a clamp. In addition, single axle trailers  'albs' have stabilizers, models 'atb' have two ramps for platform tilting.

8 Optional accessories

15 mm thick anti-slip plywood floor that enables walking and contains any leakage (for 'albs' and 'atb' models).

1100 kg KNOTT winch with a roller for changing the rope direction (for 'albs' models).

Spare wheel mount.

Trailer support (700 mm) for 'albs' and 'm18 wer. A' models.

AL‑KO stabilizer that efficiently eliminates tilting from side to side, swinging and swaying.

Shock absorbers to reduce dangerous shocks, improve stability while driving and braking and ensure optimal contact between trailer wheels and road surface.

Hoops and high cover 1200 mm (for 'm18 wer. A' models).

Why invest in a trailer?

  • you will become independent from trailer rental outlets and transport companies,
  • you will reduce costs related to serial transport of goods and equipment,
  • no need to buy a larger car,
  • you will avoid trouble connected with renting a trailer,
  • you will not have to ask your friends for help,
  • you will increase your comfort.