Pro

model: N7-236 prr [GN180]

Product specification

Very strong frame by 2 through-going U-profiled longitudinal chassis beams as well as 3 horizontal chassis beams.
The trailer is available in the registration version with DMC: 400 kg, 450 kg, 500 kg, 550 kg, 600 kg, 650 kg, 700 kg, 750 kg.
PRO gives you the possibility to unscrew all 4 side panels and use the trailer as a platform to capitalise the space.
With 450 mm high side panels and tip, PRO is a very functional trailer that can be used for many purposes.
Eye-lashing rings in each corner are standard on all NEPTUN trailers to fully secure and tie-down the cargo.
Cover tie-down buttons are standard on all NEPTUN trailers for easy tie-down of either flat or high covers.
V-drawbar with reinforcement.
Multi-function tail lights are mounted under the tail gate, thus protected from moist and verdigris, the best possible way.
Soft suspension in full range of load – from zero to max. Large payload, very good vibrations damping caused by shock absorbers.

Type: low-bed

Gross Weight: 750 kg

Payload: 543 kg

Internal dimensions: 236 x 129 x 45 cm

Wheels: 13 ″

Axle: 1

Brakes: No

Front gate: steel

Tilt drawbar: Yes

Pro

1 Rigid and durable design

High durability of the trailer design is ensured by the welded frame and drawbar, cold-bent frame sections of the U-shaped cross section frame and the lateral beams (two or three depending on the model).

2 Two in one

Trailer sidewalls can be easily dismantled. The user gets a flat platform for transporting larger loads.

3 Durable and functional sidewalls

Profiled 450-mm sidewalls are made of high quality zinc-plated steel sheet. They are profiled to be rigid and resistant to impact, and to look attractive. Front sidewall is openable – thus the trailer can be used to transport long loads.

4 Easy load securing

Lashing eyes are located in the corners of the platform. Because they are fitted to the floor and to the welded frame, the load can be secured more effectively.

5 Lamp protection

Multifunction lamps are installed inside the tailgate and under the rear sidewall and therefore protected against damage, moisture and mud. Cable connections are well protected, guaranteeing long-lasting maintenance-free operation.

Accessory	GN023	GN180	GN246	GN159	GN182	GN082	GN247	GN148	GN199
Name	N7-236 pro	N7-236 prr	N7-253 pro	N7-263 pro	N7-263 prr	N7-236 2 pro	N7-253 2 pro	N7-263 2 pro	N7-263 2 pro+
Flat Cover, 650 g/m2, Grey	AP042	AP042	AP247	AP233	AP233	AP042	AP247	AP233	AP233
Support Bar for Flat Cover, adjustable	GA257	GA257	GA257	GA257	GA257	GA257	GA257	GA257	GA257
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, Grey	AP043	AP043	AP244	AP235	AP235	AP043	AP244	AP235	AP235
Hoops for High Cover, 800 mm	GA219	GA219	GA373	GA346	GA346	GA219	GA373	GA346	GA346
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey	AP057	AP057	AP245	AP236	AP236	AP057	AP245	AP236	AP236
Hoops for High Cover, 1200 mm	GA220	GA220	GA374	GA339	GA339	GA220	GA374	GA339	GA339
Mesh Side Kit, 395 mm	GA035	GA035	GA376	GA335	GA335	GA035	GA376	GA335	GA335
Side Extension Kit, 370 mm	GA059	GA059	GA353	GA334	GA334	GA059	GA353	GA334	GA334
Ladder Rack and Side Rail Kit	GA022	GA022	GA352	GA336	GA336	GA022	GA352	GA336	GA336
Spare Wheel, 155/70 R13, 4x100 mm	-	-	-	-	-	KK022	KK022	KK022	KK022
Spare Wheel, 165/70 R13, 4x100 mm	KK026	KK026	KK026	KK026	KK026	-	-	-	-
Spare Wheelsholder, Trækstang	GA159	GA159	GA159	GA159	GA159	GA159	GA159	GA159	GA159
Spare Wheelsholder, side	GA099	GA099	GA099	GA099	GA099	GA099	GA099	GA099	GA099
Anti-theft, Steel Locking Shoe w/ Key	AU090	AU090	AU090	AU090	AU090	AU090	AU090	AU090	AU090
Anti-theft, Box Lock w/ Padlock	AU121	AU121	AU121	AU121	AU121	AU121	AU121	AU121	AU121
Anti-theft, Coupling Lock w/ Key	AU059	AU059	AU059	AU059	AU059	AU059	AU059	AU059	AU059
Clamp for Jockey Wheel and Prop Stand, 200 mm	OK002	OK002	OK002	OK002	OK002	OK002	OK002	OK002	OK002
Jockey Wheel, 200 mm	KM002	KM002	KM002	KM002	KM002	KM002	KM002	KM002	KM002
Jockey Wheel w/ Clamp, 200 mm	GA227	GA227	GA227	GA227	GA227	GA227	GA227	GA227	GA227
Prop Stand, 700 mm	KM006	KM006	KM006	KM006	KM006	KM006	KM006	KM006	KM006
Rear panel board - driveway	GA319	GA319	GA319	GA319	GA319	-	-	-	-
Shock Absorber, 750 kg	QS008	-	QS008	QS008	-	-	-	-	-
Shock Absorber Kit, 750 kg	GZ598	-	GZ598	GZ598	-	-	-	-	-
Gas Spring	QS009	QS009	QS009	QS009	QS009	-	-	-	-
Gas Spring, Fitting for Drawbar	GZ506	GZ506	GZ506	GZ506	GZ506	-	-	-	-
Gas Spring, Fitting for Chassis	GZ594	GZ594	GZ594	GZ594	GZ594	-	-	-	-

Accessory	GN136	GN037	GN174	GN175
Name	N07-236 pro	N13-236 pro	N13-253 pro	N16-253 pro
Flat Cover, 650 g/m2, Grey	AP042	AP042	AP247	AP247
Support Bar for Flat Cover, adjustable	GA257	GA257	GA257	GA257
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, Grey	AP043	AP043	AP244	AP244
Hoops for High Cover, 800 mm	GA219	GA219	GA373	GA373
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey	AP057	AP057	AP245	AP245
Hoops for High Cover, 1200 mm	GA220	GA220	GA374	GA374
Mesh Side Kit, 395 mm	GA035	GA035	GA376	GA376
Side Extension Kit, 370 mm	GA059	GA059	GA353	GA353
Ladder Rack and Side Rail Kit	GA022	GA022	GA352	GA352
Spare Wheel 165/70 R13, 4 x 100	KK026	-	-	-
Spare Wheel, 185 R14C, 5x112 mm	-	KK008	KK008	KK008
Spare Wheelsholder, side	GA099	-	-	-
Anti-theft, Box Lock w/ Padlock	AU121	AU121	AU121	AU121
Clamp for Jockey Wheel and Prop Stand, 200 mm	OK002	OK002	OK002	OK002
Jockey Wheel, 200 mm	KM002	KM002	KM002	KM002
Jockey Wheel w/ Clamp, 200 mm	GA227	GA227	GA227	GA227
Prop Stand, 700 mm	KM006	KM006	KM006	KM006
Rear panel board - driveway	GA319	GA319	GA319	GA319
Gas Spring, Fitting for Drawbar-Chassis	GZ898	GZ898	GZ898	GZ898
Set of shock absorbers for braked axles, AL-KO	GA354	GA355	GA355	GA356

6 Easy unloading

All PRO models have a tilting loading platform making it easy to remove the load from the trailer.

Neptun Trailer

Pro N7-236 prr [GN180]

Pro

model: N7-236 prr [GN180]

Product specification

Pro

Why invest in a trailer?

Become a distributor