Type: low-bed
Gross Weight: 750 kg
Payload: 597 kg
Internal dimensions: 225 x 148.5 x 31 cm
Wheels: 13 ″
Axle: 1
Brakes: No
Front gate: none
Tilt drawbar: Yes
1 Safety and comfort
Independent suspension, rubber spring axle and a low suspended frame ensure safe and stable driving.
2 Easy load securing
The trailer is fitted with handles for fastening belts for securing a motorbike during transportation. Rails have blocking bars to secure the front wheels of the transported vehicle.
3 Protection of lamps
Position lamps are embedded into the front beam and rear multifunction lamps are installed in a steel enclosure. In this way, all the lamps are protected against mechanical damage.
4 Transport of two motorcycles
As standard, the MOTO model is equipped with two rails with bars used for mounting the front wheels of two motorcycles and one ramp.
5 Protection against dirt
Integrated mudguards protect transported motorcycles against getting dirty.
Accessory | GN064 | GN202 | GN249 | GN250 |
Name | N6-220 pm2 | N7-221 pm3 | N10-255 moto | N13-255 moto |
High Cover w/ Strap Fasteners, 1500 mm, 520 g/m2, Grey | - | - | AP298 | AP298 |
High Cover w/ Strap Fasteners, 1500 mm, 650 g/m2, Grey | - | - | AP299 | AP299 |
Hoops for High Cover, 1500 mm | - | - | GA441 | GA441 |
Spare Wheel, 155/70 R13, 4x98 mm | KK014 | KK014 | - | - |
Spare Wheel, 155/70 R13, 4x100 mm | KK022 | KK022 | - | - |
Spare Wheel, 185/70 R13 , 4x100 mm | - | - | KK007 | - |
Spare Wheel, 185 R14C, 5x112 mm | - | - | - | KK008 |
Spare Wheel Support, bottom | GA173 | GA390 | - | - |
Spare Wheel Support, drawbar | - | - | GA159 | GA159 |
Anti-theft, Steel Locking Shoe w/ Key | AU090 | AU090 | - | - |
Anti-theft, Box Lock w/ Padlock | AU121 | AU121 | AU121 | AU121 |
Anti-theft, Coupling Lock w/ Key | AU059 | AU059 | - | - |
Clamp for Jockey Wheel and Prop Stand, 200 mm | OK002 | OK002 | OK002 | OK002 |
Jockey Wheel, 200 mm | KM002 | KM002 | KM002 | KM002 |
Jockey Wheel w/ Clamp, 200 mm | GA227M | GA227M | GA227 | GA227 |
Prop Stand, 700 mm | KM006 | KM006 | - | - |
Channel w/ Bracket, 2200 x 175 mm | GZ552 | GZ552 | - | - |
Loading Ramp, 1680 x 180 mm | GA171 | GA171 | - | - |
Gas Spring, Fitting for Drawbar-Chassis | GA371 | GA371 | - | - |
Set of shock absorbers for braked axles, AL-KO | - | - | GA355 | GA355 |
Motor stand set for N_-255 moto | - | - | GA437 | GA437 |
Motor stand | - | - | GA436 | GA436 |
6 Easy unloading
Tilting load platform and the ramp allow for easy loading and unloading of a motorcycle.