As standard, the trailer is equipped with two stands for attaching the front wheel of the motorcycle.
The trailer is available in the registration version with DMC: 1000 , 1200 , 1300 kg
The high strength of the structure is ensured by a fully welded frame, cold-formed U-section stringers and 3 crossbeams.
Sagittal drawbar with reinforcement, hot-dip galvanized.
Built-in fenders protect the transported motorcycles against dirt.
Independent suspension on AL-KO axles ensure safe and stable driving.
The lighting in the model is placed above the platform to facilitate the loading of the motorcycle.
A tilting loading platform with a screw lift allows for easy loading and unloading of the motorcycle.
As standard, the trailer is equipped with a ramp, screw lift and manoeuvring wheel.
The model has holders for fastening belts to secure the motorcycle during transport.
After removing the stands, the trailer becomes a universal platform and enables the transport of small machines or other goods.
Optionally, it is possible to transport 3 motorcycles after purchasing an additional stand.
Additional optional accessories are offered for the model:
Rack with tarpaulin
Spare wheel holder
Type: for motorbikes
Gross Weight: 1300 kg
Payload: 978 kg
Internal dimensions: 255 x 166 x 44 cm
Wheels: 14 ″
Front gate: none
Tilt drawbar: Yes
1 Safety and comfort
Independent suspension, rubber spring axle and a low suspended frame ensure safe and stable driving.
2 Easy load securing
The trailer is fitted with handles for fastening belts for securing a motorbike during transportation. Rails have blocking bars to secure the front wheels of the transported vehicle.
3 Protection of lamps
Position lamps are embedded into the front beam and rear multifunction lamps are installed in a steel enclosure. In this way, all the lamps are protected against mechanical damage.
4 Transport of two motorcycles
As standard, the MOTO model is equipped with two rails with bars used for mounting the front wheels of two motorcycles and one ramp.
5 Protection against dirt
Integrated mudguards protect transported motorcycles against getting dirty.
|Name||N6-220 pm2||N7-221 pm3||N10-255 moto||N13-255 moto|
|High Cover w/ Strap Fasteners, 1500 mm, 520 g/m2, Grey||-||-||AP298||AP298|
|High Cover w/ Strap Fasteners, 1500 mm, 650 g/m2, Grey||-||-||AP299||AP299|
|Hoops for High Cover, 1500 mm||-||-||GA441||GA441|
|Spare Wheel, 155/70 R13, 4x98 mm||KK014||KK014||-||-|
|Spare Wheel, 155/70 R13, 4x100 mm||KK022||KK022||-||-|
|Spare Wheel, 185/70 R13 , 4x100 mm||-||-||KK007||-|
|Spare Wheel, 185 R14C, 5x112 mm||-||-||-||KK008|
|Spare Wheel Support, bottom||GA173||GA390||-||-|
|Spare Wheel Support, drawbar||-||-||GA159||GA159|
|Anti-theft, Steel Locking Shoe w/ Key||AU090||AU090||-||-|
|Anti-theft, Box Lock w/ Padlock||AU121||AU121||AU121||AU121|
|Anti-theft, Coupling Lock w/ Key||AU059||AU059||-||-|
|Clamp for Jockey Wheel and Prop Stand, 200 mm||OK002||OK002||OK002||OK002|
|Jockey Wheel, 200 mm||KM002||KM002||KM002||KM002|
|Jockey Wheel w/ Clamp, 200 mm||GA227M||GA227M||GA227||GA227|
|Prop Stand, 700 mm||KM006||KM006||-||-|
|Channel w/ Bracket, 2200 x 175 mm||GZ552||GZ552||-||-|
|Loading Ramp, 1680 x 180 mm||GA171||GA171||-||-|
|Gas Spring, Fitting for Drawbar-Chassis||GA371||GA371||-||-|
|Set of shock absorbers for braked axles, AL-KO||-||-||GA355||GA355|
|Motor stand set for N_-255 moto||-||-||GA437||GA437|
6 Easy unloading
Tilting load platform and the ramp allow for easy loading and unloading of a motorcycle.