Navy

model: N7-17 navy [GN034]

Product specification

NAVY has an adjustable drawbar which allows it to transport boots from 3.10 to 5.20 m. long (10 to 17 feet).
The trailer is available in the registration version with DMC: 350 kg, 400 kg, 450 kg, 500 kg, 550 kg, 600 kg, 650 kg, 700 kg, 750 kg.
Tipping keel roller at the back makes it super easy to launch and recover the boat.
All side rolls and keel rolls are adjustable as well as the axle and can thus be adjusted exactly to your boat.
NAVY is made out of first-class hot dip galvanised steel which makes it last for many years.
2 small handles at the back has to be loosened and within seconds you can dismantle the light panel.
NAVY comes with a 450 kg winch, winch post, jockey wheel, 1 tipping keel roll, 2 fixed keel rolls and 2 side rolls.
Independent suspension and rubber spring axle guarantee a good and secure driving.
Multi-function tail lights are mounted on the light panel, thus protected from moist and verdigris, the best possible way.
Waterproof hubs – bearings with additional protection against water ingress.

Type: low-bed

Gross Weight: 750 kg

Payload: 583 kg

Internal dimensions: 310 x 99 x 40 cm

Wheels: 13 ″

Axle: 1

Brakes: No

Front gate: none

Tilt drawbar: No

Navy

1 For boats with the length between 8 to 20 ft

The NAVY trailer has a special design enabling to adjust the length of the trailer to the length of a boat within the range from 8 to 20 ft.

2 Easy loading and unloading of a boat

Rear horizontal rollers in N7-17 navy and N13-20 navy installed on the cradle make it possible to slide a boat smoothly from the trailer or pull it onto the trailer. A boat pressure on the cradle is reduced, so there is a slight risk of damage to the boat.

3 Optimal load distribution

Positions of side supports and the cradle in N7-17 navy and N13-20 navy are fully adjustable. This is ensured by the optimum pressure of rollers made of non-staining plastic to the sidewalls and keel. Addition – at the client’s request – a lateral support on each side increases security of the boat transported on the trailer.

4 Long life

The NAVY models are made of high quality hot-dip galvanized steel. This ensures a long life for the trailer.

5 Fast and easy handling of the tailgate

Rear light beam can be quickly and easily disassembled.

Accessory	GN195	GN243	GN034	GN248	GN231
Name	N7-12 navy	N7-12 js (jet ski)	N7-17 navy	N7-17 kj	N13-20 navy
Spare Wheel, 155/70 R13, 4x100 mm	KK022	KK022	KK022	KK022	-
Spare Wheel, 185 R14C, 5x112 mm	-	-	-	-	KK008
Spare Wheel Support	GA388	GA388	GA117	GA117	GA407
Anti-theft, Steel Locking Shoe w/ Key	AU090	AU090	AU090	AU090	-
Anti-theft, Box Lock w/ Padlock	AU121	AU121	AU121	AU121	AU121
Anti-theft, Coupling Lock w/ Key	AU059	AU059	AU059	AU059	-
Clamp for Jockey Wheel and Prop Stand, 200 mm	OK002	OK002	OK002	OK002	OK002
Jockey Wheel, 200 mm	KM002	KM002	KM002	KM002	-
Jockey Wheel w/ Clamp, 200 mm	GA227	GA227	GA227	GA227	-
Prop Stand, 700 mm	KM006	KM006	KM006	KM006	KM006
Flat side support (1 szt - rubber skid 292x100)	GA394	GA394	GA395	-	GA412
Set of side supports (2 szt - carpet skid 2000x122)	GA430	GA430	GA486	-	-
Keel Roll Kit incl. Support	-	-	GZ886	-	-
Double Side Rolls Kit incl. Support and Clamp	-	-	GZ889	-	-
Platform	GA433	GA433	GA432	-	GA434
Higher winch base	-	-	GA429	-	-
A set of sheaths (16 pcs) to protect the kayak	-	-	GA435	GA435	-
Construction for transporting kayaks - set	-	-	GA443	-	-
Winch w/ Belt, 50 mm x 7 m, 450 kg	QS011	QS011	QS011	-	-
Winch, 1100 kg	-	-	-	-	QS018
Set of shock absorbers for braked axles, AL-KO	-	-	-	-	GA355
Wheel wedges	-	-	-	-	AU123
Wheel wedge handle	-	-	-	-	AU123A

6 Standard equipment

The NAVY model is fitted with a winch with the capacity of 450 kg (in N7-12 navy and N7-17 navy) or 1100 kg (in N13-20 navy), winch supports, Jockey wheel, fixed horizontal rollers and adjustable side supports.

Neptun Trailer

Navy N7-17 navy [GN034]

Navy

model: N7-17 navy [GN034]

Product specification

Navy

Why invest in a trailer?

Become a distributor