Neptun Trailer

Bois N16-236 bois [GN134]

Bois

model: N16-236 bois [GN134]

Product specification

  • Very strong frame by 2 through-going U-profiled longitudinal chassis beams as well as 3 horizontal chassis beams.
  • The trailer is available in the registration version with DMC: 1000 kg, 1200 kg, 1300 kg, 1400 kg, 1600 kg.
  • TRAILWOOD LUX comes with a Ladder Rack & Railing Kit as well as a Jockey Wheel as standard equipment.
  • Easy and practical unloading with manual tip + possibility to unscrew all 4 side panels and use the trailer as a platform.
  • Eye-lashing rings in each corner are standard on all NEPTUN trailers to fully secure and tie-down the cargo.
  • Cover tie-down buttons are standard on all NEPTUN trailers for easy tie-down of either flat or high covers.
  • V-drawbar with reinforcement, independent suspension and rubber spring axle guarantee a good and secure driving.
  • All steel parts are hot dip galvanised with passivation to resist any corrosion.
  • Multi-function tail lights are mounted under the tail gate, thus protected from moist and verdigris, the best possible way.
N16-236 bois [GN134]

Type: low-bed

Gross Weight: 1600 kg

Payload: 1315 kg

Internal dimensions: 236 x 129 x 37 cm

Wheels: 14 ″

Axle: 1

Brakes: Yes

Front gate: plywood

Tilt drawbar: Yes

Bois

1 Rigid and durable design

High durability of the trailer design is ensured by the welded frame and drawbar, cold-bent frame sections of the U-shaped cross section frame and three lateral beams.

2 Two in one

Trailer sidewalls can be easily dismantled. The user gets a flat platform for transporting larger loads.

3 Standard accessories

The BOIS model comes with railings on the sidewalls, sidewall rack and a Jockey wheel.

4 Easy load securing

Lashing eyes are located in the corners of the platform. Because they are fitted to the floor and to the frame, the load can be secured in a much better way. Railings can also be used to fix the load.

5 Lamp protection

Multifunction lamps are installed inside the tailgate and under the rear sidewall and therefore protected against damage, moisture and mud. Cable connections are well protected, guaranteeing long-lasting maintenance-free operation.

Accessory GN138 GN127 GN134 GN197 GN200 GN201
Name N07-236 bois N13-236 bois N16-236 bois N07-253 bois N10-253 bois N13-253 bois
Flat Cover m/ Velcro, 520 g/m2, Grey AP250 AP250 AP250 AP254 AP254 AP254
Flat Cover, 520 g/m2, Grey AP213 AP213 AP213 AP252 AP252 AP252
Flat Cover m/ Velcro, 650 g/m2, Grey AP251 AP251 AP251 AP255 AP255 AP255
Flat Cover, 650 g/m2, Grey AP214 AP214 AP214 AP253 AP253 AP253
Support Bar for Flat Cover, adjustable GA257 GA257 GA257 GA257 GA257 GA257
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, blue AP203 AP203 AP203 - - -
High Cover w/ Strap Fasteners, 800 mm, 520 g/m2, Grey AP122 AP122 AP122 AP242 AP242 AP242
High Cover w/ Strap Fasteners, 800 mm, 650 g/m2, Grey AP043 AP043 AP043 AP244 AP244 AP244
Hoops for High Cover, 800 mm GA345 GA345 GA345 GA384 GA384 GA384
High Cover w/ Strap Fasteners, 1200 mm, 520 g/m2, Grey AP135 AP135 AP135 AP243 AP243 AP243
High Cover w/ Strap Fasteners, 1200 mm, 650 g/m2, Grey AP057 AP057 AP057 AP245 AP245 AP245
Hoops for High Cover, 1200 mm GA338 GA338 GA338 GA385 GA385 GA385
Mesh Side Kit, 395 mm GA035 GA035 GA035 GA376 GA376 GA376
Ladder Rack GA301 GA301 GA301 GA301 GA301 GA301
Spare Wheel 165/70 R13, 4 x 100 KK026 - - KK026 - -
Spare Wheel, 185/70 R13 , 4x100 mm - - - - KK007 -
Spare Wheel, 185 R14C, 5x112 mm - KK008 KK008 - - KK008
Spare Wheelsholder, side GA303 - - GA303 - -
Spare Wheelsholder, under GA098 GA098 GA098 GA098 GA098 GA098
Anti-theft, Box Lock w/ Padlock AU121 AU121 AU121 AU121 AU121 AU121
Clamp for Jockey Wheel and Prop Stand, 200 mm OK002 OK002 OK002 OK002 OK002 OK002
Jockey Wheel, 200 mm KM002 KM002 KM002 KM002 KM002 KM002
Jockey Wheel w/ Clamp, 200 mm GA227 GA227 GA227 GA227 GA227 GA227
Prop Stand, 700 mm KM006 KM006 KM006 KM006 KM006 KM006
Rear panel board - driveway GA323 GA323 GA323 GA323 GA323 GA323
Set of shock absorbers for braked axles, AL-KO GA354 GA355 GA356 GA354 GA355 GA355
Gas Spring, Fitting for Drawbar-Chassis GZ898 GZ898 GZ898 GZ898 GZ898 GZ898

6 Easy unloading

All BOIS models have a tilting loading platform. This makes it easy to remove the load from the trailer (optional installation of a gas spring to hold the load platform up).

Why invest in a trailer?

  • you will become independent from trailer rental outlets and transport companies,
  • you will reduce costs related to serial transport of goods and equipment,
  • no need to buy a larger car,
  • you will avoid trouble connected with renting a trailer,
  • you will not have to ask your friends for help,
  • you will increase your comfort.