Navy
boat trailer with adjustable length.
1 For boats with the length between 8 to 20 ft
The NAVY trailer has a special design enabling to adjust the length of the trailer to the length of a boat within the range from 8 to 20 ft.
2 Easy loading and unloading of a boat
Rear horizontal rollers in N7-17 and N13-20 installed on the cradle make it possible to slide a boat smoothly from the trailer or pull it onto the trailer. A boat pressure on the cradle is reduced, so there is a slight risk of damage to the boat.
3 Optimal load distribution
Positions of side supports and the cradle in N7-17 and N13-20 are fully adjustable. This is ensured by the optimum pressure of rollers made of non-staining plastic to the sidewalls and keel. Addition – at the client’s request – a lateral support on each side increases security of the boat transported on the trailer.
4 Long life
The NAVY models are made of high quality hot-dip galvanized steel. This ensures a long life for the trailer.
| Accessory | GN034 | GN195 |
| Name | N7-17 navy | N7-12 navy |
| Spare Wheel, 155/70 R13, 4x98 mm | KK014 | KK014 |
| Spare Wheel Support, drawbar | GA117 | GA388 |
| Anti-theft, Steel Locking Shoe w/ Key | AU090 | AU090 |
| Anti-theft, Box Lock w/ Padlock | AU121 | AU121 |
| Anti-theft, Coupling Lock w/ Key | AU059 | AU059 |
| Clamp for Jockey Wheel and Prop Stand, 200 mm | OK002 | OK002 |
| Jockey Wheel, 200 mm | KM002 | KM002 |
| Jockey Wheel w/ Clamp, 200 mm | GA227 | GA227 |
| Prop Stand, 700 mm | KM006 | KM006 |
| Side support flat (skid) | GA395 | GA394 |
| Keel Roll Kit incl. Support | GZ886 | - |
| Double Side Rolls Kit incl. Support and Clamp | GZ889 | - |
| Winch w/ Belt, 50 mm x 7 m, 450 kg | QS011 | QS011 |
| Accessory | GN231 |
| Name | N13-20 navy |
| Spare Wheel, 185 R14C, 5x112 mm | KK008 |
| Spare Wheelsholder | GA407 |
| Anti-theft, Box Lock w/ Padlock | AU121 |
| Clamp for Jockey Wheel and Prop Stand, 200 mm (fi48) | OK002 |
| Prop Stand, 700 mm (fi48) | KM006 |
| Winch, 1100 kg | QS018 |
| Shock Absorbers, AL-KO | HA003 |
| Shock Absorber Fittings, plug-in, AL-KO | HA004 |
| Wheel wedges | AU123 |
| Wheel wedge handle | AU123A |
| Side support flat (skid) | GA412 |
5 Fast and easy handling of the tailgate
Rear light beam can be quickly and easily disassembled.
6 Standard equipment
The NAVY model is fitted with a winch with the capacity of 450 kg (in N7-12 and N7-17) or 1100 kg (in N13-20 ), winch supports, Jockey wheel, fixed horizontal rollers and adjustable side supports.
